Chartered Surveyors for property solutions

Twitter Linkedin

	
	

Property Services

Choose from our comprehensive range of professional property services

VIEW

Commercial Property

Search our commercial property listings for your specific requirements

Exclude Sold
Exclude Under Offer
Exclude Let

SEARCH

News & Knowledge

For downloads, news, blog, media & events

GO

Considerations for determining boundary lines


View this article as a PDF.

This guide considers the factors involved in determining a boundary line, including the limitations of standard map scales and the difficulties in determining boundary lines from plans alone.

It explores how surveyors must use information gathered from maps and plans combined with existing physical features available on the land and their experience in boundary matters, to put together an evidence and opinion based report that shows ‘on the balance of probability’ where the boundary line is located.

Should you require assistance in property disputes, including the determination of a boundary line, please see our dispute resolution service page.

 

Contents

  • Standard map scales
  • Determining a boundary line
  • Physical markers
  • Comments on land registry plans
  • Comments on plan accuracy
  • Confidence in scales
  • HM Land registry boundaries – general and determined
  • Conclusions for determining boundary lines

 

Standard map scales

Simply put, standard map scales do not provide sufficient accuracy to dictate boundary lines. They can identify that a general boundary line is present, but are not specific enough for mapping techniques to identify a boundary to more than an accuracy of within two to three meters. Noting that most boundary disputes concern an area of a foot at most, this is not a sufficient level of accuracy for boundary matters.

 

Determining a boundary line

The only way for a boundary line to be determined is for neighbouring owners to agree where the line falls. Alternatively, a High Court Judge can make the award but this is a significantly expensive process for all involved.

Therefore, when disagreements occur regarding the position of a boundary line, the expertise of third party arbitrator will be required to locate and help both parties agree on the position of the boundary line through the process of arbitration.

A Chartered Surveyor certified in arbitration matters will combine map and plan information with a detailed inspection of the physical area in question for signs of existing boundary markers. They will then put together an evidence based report that shows on the balance of probability where the boundary is located. The outcome of the report is binding to both parties.

 

Physical markers

Physical boundary markers can be eroded over time. Examples include hedges, ditches, tree lines or fencing. As development, constructions or natural erosion occurs over time, the evidence of these types of boundary markers can become diminished leaving only partial evidence such as old fence posts and bits of hedge.

Arbitrators must piece together and identify the most likely place for boundary lines to sit by correlating any fencing, trees and remaining evidence of existing boundary markers to determine where the boundary line falls.

Once determined, owners can mark the line, and the party responsible for fencing can erect a new physical boundary on their side of the line.

Arbitrators can also be instructed to arrange this on the owner’s behalf or can be required under court order.

 

Comments on land registry plans

The following section has been compiled from the practice guide 40, supplement 1: Land Registry Plans: the basis of Land Registry Plans.The Land Registry file plan is based upon the Ordnance Survey plan most recently produced prior to the date of registration.

 

  • The 1:1250 scale “national series” of plans are revised from time to time by the Ordnance Survey. The Title plans produced by HM Land Registry will reflect the physical features on the ground at the date of the Ordnance Survey plans. Thus over time, the Ordnance Survey plans will be modified to reflect changes on the ground
  • On an Ordnance Survey plan, a solid line represents the centre line of a physical feature more than (300mm) 1’ in height.
  • A dashed line on the Ordnance Survey plan represents a change in the character of the ground surface and this is used for example, to reflect the abutment of the highway with the pavement. A dashed line can also denote a legal boundary which has yet to be physically defined on the ground.

 

Comments on plan accuracy

When trying to derive distances between features on a map via scaling, it is necessary to consider how accurate the map is in representing the actual points on the ground, thus consequently how accurate the scaled measurements we work from can be when derived from plans or maps.

We base our conclusions of this matter on the accuracy guidance offered by Ordnance survey below;

 

  • Ordnance Survey, in discussing the accuracy of mapping, refer to “relative accuracy” when comparing the scale distances between features on the map with the distance between those features as measured on the ground.
  • Ordnance Survey quote the relative accuracy of their 1:1250 scale urban maps as being less than + or – 0.5m (1’8’’). Further, it should be expected that in taking scaled measurements off the map, 95% of the errors will be less than 0.9m (2’11’’), and that 99% of the errors will be less than 1.1m (3’7’’).
  • The relative accuracy for Ordnance Surveys 1:2500 scale urban and rural maps is less than + or – 1.0m (3’3’’). Further that is should be expected that in taking scaled measurements off the map, 95% of the errors will be less than 1.9m (6’3’’), and that 99% of the errors will be less than 2.5m (8’2’’)
  • The thickness of a line on a 1:1250 map is between 0.2 and 0.3 of a millimetre. This represents between 250mm and 375mm (10” and 15”) on the ground.

Confidence in scaling

Therefore, I would not be confident when scaling between two such lines on a map that the scale distances would have an accuracy of + or – 0.5 (1’8”) for urban maps at 1:1250 or + or – 1.0m (3’3”) for urban and rural maps at a scale of 1:2500. Thus clearly there are significant difficulties in assuming high degrees of accuracy when scaling from Land Registry plans at these scales.

When on site we will always try to measure from physical features where possible. However, there is also a problem that where two physical features exist close together, the lines on the plan identifying these features will merge on one side and will be shown as a single line.

 

HM Land registry boundaries – general and determined

The Land Registry prepares plans which show “general boundaries”.

HMLR advise that the position of boundaries indicated on their plans are not specific and that it is for individual property owners and their surveyors to identify “actual boundaries” from physical features on the ground. In this way, boundaries are actually “determined”.

A determined boundary can be achieved only by the property owners on either side or, in default, by a judge. Whilst property owning parties may delegate this responsibility to their surveyors or a third party expert, they are still considered to be making determination.

Where parties are in dispute of the boundary line, and find no way to resolve the dispute, then a judge in Court is the only effective remedy.

 

Conclusions upon the relative accuracy achievable from OS plans

In reference to the comments above regarding the accuracy of plans used by HM Land Registry, you will see, when dealing with scale drawings of 1/2500, the relatively accuracy between two lines is plus or minus 1 metre. If taking scaled measurements off the OS map, the errors would be expected to be less than 1.9 metres in 95% of cases but up to 2.5 metres in some cases.

The black lines on the maps on a 1/2500 scale would represent between 0.5 metres and 0.75 metres on the ground; but then the accuracy would then be to the nearest metre, either way.

As such, I do not consider that one can rely upon scaling from land Registry or Ordnance Survey plans when dealing with disputes which are less than say, 2.5 metres.

Instead one must use information gathered from maps combined with existing physical features available on the land, along with their experience in boundary matters to put together an evidence and opinion based report that shows on the balance of probability where the boundary line is located.

…………………………………………………………………………………………………………………………………………………

Michael CarrMichael Carr has been advising upon boundaries and boundary disputes since 1980. Since 1984 he has regularly been involved in the provision of expert advice and reports in connection with boundary disputes and issues relating to them, including attendance at court for the purpose of providing evidence.

The above guidance reflects his expert insight in to considerations for determining a boundary line.

Tell us your requirements for assistance with property dispute resolution.

 

 

 

News & Knowledge Categories

Read our latest blogs

Blog

Click to view industry comment, top…
Read Kempton Carr Croft news here

Our news

Click to view KCC business activity,…
View our area guides

Area Guides

Click to find out more about…
View our property services brochure

Resource Downloads

Subscribe to receive downloads from Kempton…
  • Most Read Posts

  • Archive

Latest Tweet

Follow on Twitter

Get in touch

We provide property solutions. Let us know how we can help with your requirements as follows.

Follow us

We have plenty to say on property. View the latest updates using your preferred method below.

Feedback

We want to offer the best service possible. Help us deliver this by sharing your honest feedback.

logo2logo1    Association of leasehold enfranchisement practionersEWI logologo11